Carrier Access Network Device Axxius 800 Manual De Usuario

5-148

Axxius 800 - Release 2.2

CLI Commands

set

set (router-lan) stp port cost

Use the set (router-lan) stp port cost command to configure Spanning Tree path cost
value for this bridge port.

Syntax:

set {rtr_lan-addr} stp port cost {port-cost-value}

Example:

set 3:1 stp port cost 100

Sets the Spanning Tree port cost value at 100, on the Router in slot 3.

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

{port-cost-value}

The value can range from 1 to 65535, higher values represent slower data paths. For a 100
Mb LAN a value of 19 is recommended. For a 10 Mb LAN a value of 100 is recommended.

set (router-lan) stp port priority

Use the set (router-lan) stp port priority command to configure Spanning Tree priority
value for this bridge port.

Syntax:

set {rtr_lan-addr} port priority

{port-priority-value}

Example:

set 3:1 stp port priority 128

The example will set the STP port priority to 128, on the Router in slot 3.

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

{port-priority-value}

Spanning Tree port priority for this bridge port. Range from 0 to 255, with a default of 128.

slot

Slot number (1-8) that contains the Router card.

port

Port number of the Router.

"profile-name"

The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.