Carrier Access Network Device Axxius 800 Manual De Usuario

5-164

Axxius 800 - Release 2.2

CLI Commands

set

set (router-wan) stp port cost

Use the set (router-wan) stp port cost command to configure Spanning Tree path cost
value for this bridge port.

Syntax:

set {rtr_card-addr} {"wan-name"} stp port cost

{port-cost-value}

Example:

set 3 stp port cost 650

The example sets the Spanning Tree port cost value at 650, on the Router card
in slot 3.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{port-cost-value}

The value can range from 1 to 65535, with higher values representing slower data paths. A
value of 15625/# of DS0s is recommended.

set (router-wan) stp port priority

Use the set (router-wan) stp port priority command to configure Spanning Tree priority
value for this bridge port.

Syntax:

set {rtr_card-addr} {"wan-name"} port priority

{port-priority-value}

Example:

set 3 stp port priority 128

The example sets the Spanning Tree port priority to 128, on the Router in slot 3.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{port-priority-value}

The value can range from 0 to 255 seconds, with a default of 128.