C. Crane OPTIPAY A-66 Manual De Usuario

6 - 1

S e c t i o n   6

This section provides energizing (power-up) 
instructions for the Optipay™ CC A-66 Coin 
Changer. 
Although the individual functions of the A-66 Coin 
Changer are pre-programmed by the manufacturer 
to customer specifications, the first time the device 
is activated, the four Tube Cassette change tubes 
must be filled with relevant coin types. 

To begin the energizing process:

1. Press the Plus 

 key (See Figure 6-1 [4]).

An audible signal will sound and the Green 
LED (See Figure 6-1 [1]) will begin flashing 
indicating that the Coin Changer is no longer 
in a standard operating mode and has now 
entered the filling level mode.

2. Insert the coin tubes.

The Coin Validator’s tube counter meters in 
the accepted coins, and the Coin Changer 
sorts the corresponding coin type into its pre-
configured tube until either:

The full sensor is covered, or

The maximum coin number is configured, 

or

The float level is reached.

If the “float” function is active, tube coins 
inserted thereafter will not be accepted and 
will be directed to the return area tray. 
Otherwise, they will be accepted and directed 
to the Cash Box.

If all the coin tubes are full:

3. Press the Plus 

 key again.

Two audible signals will sound and the Green 
LED will light constantly indicating that the 
Coin Changer is no longer in the filling level 
mode and has returned to the operating mode.

Figure 6-1 Coin Validator Keyboard