C. Crane OPTIPAY A-66 Manual De Usuario

7 - 1

S e c t i o n   7

This section explains how to enter functions and 
settings directly on the Optipay™ CC A-66 Coin 
Changer using its various operating controls (e.g., 
the front panel Keyboard and the DIP Switch 
Block), rather than using the additional program-
ming tool accessories.

Coins can be either vended from the change tubes 
individually if a coin acceptance test is desired, or 
consecutively when the tubes need to be com-
pletely emptied (e.g., before transit, for repairs, or 
in case of an inventory).

Membrane inventory keys 

, 

, 

 and   apply 

to the "left", "middle left", "middle right", and 
"right" coin tubes respectively. 

To vend tube coins individually, simply press the 
corresponding 

, 

, 

 and   key. One coin 

will pay out each time the specific key is pressed.
To vend several tube coins:

1. Hold down the desired 

, 

, 

 or   mem-

brane key for approximately five seconds.
The corresponding tube will automatically 
empty without having to press the respective 
key again.

2. Now, press any other key.

The coins will stop dispensing if not already 
completely emptied.

If a “float” level is configured, the change tubes 
can be emptied to the tube counter’s set float level 
value.
 Emptying the change tubes to the set float level:

1. Press the Plus 

 key.

An audible signal will sound and the Green 
LED will begin flashing indicating that the 
Coin Changer is no longer in a standard oper-
ating mode and has now entered the filling 
level mode.

2. Hold down any key, for approximately five 

seconds (the Green LED illuminates).
All tubes will automatically empty to the 
preconfigured float level. Afterwards, two 
audible signals will sound and the Green LED 
will light constantly indicating that the Coin 
Changer is no longer in the filling level mode, 
and has returned to the operating mode.

After an inventory or repair the tube cassette’s four 
change tubes can be refilled with relevant coin 
types through the Coin Validator using the key-
board.