Audio Power DSP System Multiface Manual De Usuario

 

 

User's Guide HDSP System Multiface II

 © RME

77

 

 
AD 
•  Resolution: 24 bit 
•  Signal to Noise ratio (SNR): 107.5 dB RMS unweighted, 111.5 dBA 
•  THD: < -100 dB, < 0.001 % 
•  THD+N: < -98 dB, < 0.0012 % 
•  Channel separation: > 100 dB 
•  Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz – 21.0 kHz 
•  Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz 
•  Input: 6.3 mm TRS jack, electronically balanced 
•  Input impedance: 10 kOhm 
•  Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV 
•  Input level for 0 dBFS @ Lo Gain: +19 dBu 
•  Input level for 0 dBFS @ +4 dBu: +13 dBu 
•  Input level for 0 dBFS @ -10 dBV: +2 dBV 
 
DA 
•  Resolution: 24 bit 
•  Dynamic Range (DR): 109 dB RMS unweighted, 112 dBA 
•  THD: < - 100 dB, < 0.001 % 
•  THD+N: < -97 dB, < 0.0014 % 
•  Channel separation: > 110 dB 
•  Maximum output level: +19 dBu 
•  Frequency response DA @ 44.1 kHz, -0.5 dB: 5 Hz – 20.9 kHz 
•  Frequency response DA @ 96 kHz, -0.5 dB: 5 Hz – 45.8 kHz 
•  Output: 6.3 mm TRS jack, servo-balanced 
•  Output impedance: 100 Ohm 
•  Output level switchable Hi Gain, +4 dBu, -10 dBV 
•  Output level at 0 dBFS @ Hi Gain: +19 dBu 
•  Output level at 0 dBFS @ +4 dBu: +13 dBu 
•  Output level at 0 dBFS @ -10 dBV: +2 dBV 
 
Stereo Monitor Output 
•  Maximum output level at 0 dBFS: +17 dBu 
•  Dynamic Range: 116 dB (RMS unweighted, unmuted), 119 dBA 
•  THD+N: -100 dB / 0.001 % 
•  Channel separation: > 110 dB 
•  Frequency response DA @ 44.1 kHz, -0.5 dB: 5 Hz – 20.8 kHz 
•  Frequency response DA @ 96 kHz, -0.5 dB: 5 Hz - 44 kHz 
•  Output impedance: 30 Ohm 
 
 

 
•  Low Jitter Design: < 3 ns external clock, < 1 ns internal clock 
•  Internal sample rates: 32 / 44.1 / 48 / 88.2 / 96 kHz 
•  Supported sample rates through word clock: 28 kHz - 103 kHz 
•  Internal resolution: 24 bit 
•  Input PLL ensures zero dropout, even at more than 40 ns jitter 
•  Bitclock PLL for trouble-free varispeed ADAT operation 
•  Ground-free digital inputs and outputs