Apollo ESP6000 Manual De Usuario
ECM-3612
64 ECM-3612 User’s Manual
3.5.2.9 Boot Up NumLock Status
Select power on state for NumLock.
Select power on state for NumLock.
Item
Description
Enabled Enable
NumLock
Disabled Disable
NumLock
3.5.2.10 Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Select if chipset or keyboard controller should control Gate A20.
Item
Description
Normal
A pin in the keyboard controller controls Gate A20
Fast
Lets chipset control Gate A20
3.5.2.11 Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
Item
Description
Enabled
Enable typematic rate/delay setting
Disabled
Disable typematic rate/delay setting
3.5.2.12 Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the key down.
Sets the number of times a second to repeat a key stroke when you hold the key down.
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
3.5.2.13 Typematic Rate (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750, 1000.
3.5.2.14 Security Option
Select whether the password is required every time the system boots or only when you
enter setup.
Select whether the password is required every time the system boots or only when you
enter setup.
Item
Description
System
The system will not boot and access to Setup will be denied if the correct password is
not entered at the prompt.
not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the correct password is not
entered at the prompt.
entered at the prompt.
Note:
To disable security, select PASSWORD SETTING at Main Menu and then
you will be asked to enter password. Do not type anything and just press
<Enter>, it will disable security. Once the security is disabled, the system
will boot and you can enter Setup freely.
<Enter>, it will disable security. Once the security is disabled, the system
will boot and you can enter Setup freely.
3.5.2.15 OS Select for DRAM > 64MB
Select the operating system that is running with greater than 64MB of RAM on the system.
Select the operating system that is running with greater than 64MB of RAM on the system.
Item
Description
Non-OS2
Disable OS for over 64 MB DRAM
OS2
Enable OS for over 64 MB DRAM