Apollo ESP6000 User Manual

Page of 104
ECM-3612 
 
64 ECM-3612 User’s Manual 
 
 
3.5.2.9  Boot Up NumLock Status 
Select power on state for NumLock. 
Item 
Description 
Enabled Enable 
NumLock 
Disabled Disable 
NumLock 
3.5.2.10  Gate A20 Option 
Select if chipset or keyboard controller should control Gate A20. 
Item 
Description 
Normal 
A pin in the keyboard controller controls Gate A20 
Fast 
Lets chipset control Gate A20   
3.5.2.11  Typematic Rate Setting 
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the 
typematic rate and typematic delay can be selected. 
Item 
Description 
Enabled 
Enable typematic rate/delay setting 
Disabled 
Disable typematic rate/delay setting 
3.5.2.12  Typematic Rate (Chars/Sec) 
Sets the number of times a second to repeat a key stroke when you hold the key down.
 
The choice: 6, 8, 10, 12, 15, 20, 24, 30. 
3.5.2.13  Typematic Rate (Msec) 
Sets the delay time after the key is held down before it begins to repeat the keystroke.
 
The choice: 250, 500, 750, 1000. 
3.5.2.14 Security Option 
Select whether the password is required every time the system boots or only when you 
enter setup. 
Item 
Description 
System 
The system will not boot and access to Setup will be denied if the correct password is 
not entered at the prompt. 
Setup 
The system will boot, but access to Setup will be denied if the correct password is not 
entered at the prompt. 
Note: 
To disable security, select PASSWORD SETTING at Main Menu and then 
you will be asked to enter password. Do not type anything and just press 
<Enter>, it will disable security. Once the security is disabled, the system 
will boot and you can enter Setup freely. 
3.5.2.15  OS Select for DRAM > 64MB 
Select the operating system that is running with greater than 64MB of RAM on the system. 
Item 
Description 
Non-OS2 
Disable OS for over 64 MB DRAM   
OS2 
Enable OS for over 64 MB DRAM