Alvarion BREEZENET BU-DS.11 Manual De Usuario
BreezeNET DS.11 Series User Manual
2-16
Name Description
Functionality
ETH
Ethernet activity/
connectivity indication
connectivity indication
OFF –Ethernet connectivity is OK.
No traffic activity detected on the port.
No traffic activity detected on the port.
Blinking Green –Ethernet connectivity is OK, with traffic on
the port.
the port.
Red – No Ethernet connectivity. When this state occurs, check
the Ethernet cable and indoor-to-outdoor cable connections.
the Ethernet cable and indoor-to-outdoor cable connections.
RSSI/Load
BAR
BAR
RB-DS.11: Received Signal Strength Indication
BU-DS.11: Number of associated RB-DS.11 units
Table
2-3: Outdoor Unit LEDs
What to do if the Self Test Fails
Upon failure of the self-test, the WLAN, DC Power and ETH LEDs, as well as the
leftmost 2 LEDs of the RSSI bar are blinking synchronously. The statuses of the
other 8 LEDs of the bar indicate the specific problem type.
leftmost 2 LEDs of the RSSI bar are blinking synchronously. The statuses of the
other 8 LEDs of the bar indicate the specific problem type.
If the Self-Test fails, try the following:
♦ Reset unit (Disconnect/reconnect the power).
♦ Check the indoor-to-outdoor cable.
♦ Reset to factory defaults (see page 3-31).
♦ Reset unit (Disconnect/reconnect the power).
♦ Check the indoor-to-outdoor cable.
♦ Reset to factory defaults (see page 3-31).
If all fails, contact technical support and provide details regarding the status of the
RSSI LEDs.
RSSI LEDs.