ALTINEX MULTI-TASKER MT109-102 Manual De Usuario
MULTI-TASKER™
400-0343-003
19
19
Example:
Group 5 of Unit ID 1 contains the cards in slots
1, 2 and 19. Read the member data for group 5
of Unit ID 1. Send the command [RDG5U1]
and receive the following feedback:
1, 2 and 19. Read the member data for group 5
of Unit ID 1. Send the command [RDG5U1]
and receive the following feedback:
G1=C1C2C19
Now, clear group 5 by sending the command
[CLMG5U1]. Reread the member data as above
and note the following feedback:
[CLMG5U1]. Reread the member data as above
and note the following feedback:
G1=EMPTY
7.3 SUMMARY OF COMMANDS
Card Commands
1)
[VER]
Receives software version
2)
[C]
Receives status of the card
3)
[CnS]
Save card settings
4)
[?C]
Show card information
5)
[?]
Show system cards
6)
[STA]
Enable/disable auto feedback
7)
[…S]
Save the command being sent
8)
[…F]
Show command feedback
9)
[ + ]
Increments and Decrements
[ - ]
selected commands
10) [SELI]
Select input volume to adjust
11) [SELO]
Select output volume to adjust
12) [SELB]
Select to adjust bass level
13) [SELT]
Select to adjust treble level
14) [VLO]
Set absolute output volume
15) [VLIm]
Set absolute input volume
16) [VLB]
Set absolute bass level
17) [VLT]
Set absolute treble level
18) [LOD0]
Turn ON loudness feature
19) [LOD1]
Turn OFF loudness feature
20) [CLR]
Reset card to default values
21) [RUP]
Ramp volume UP to max (16)
22) [RUP=]
Ramp volume UP to a value
23) [RDN]
Ramp volume DOWN to min (1)
24) [RDN=]
Ramp volume DOWN to a value
25) [RST]
Stop ramping
26) [RAMP]
Display ramp rate
27) [RAMP=] Set ramp rate
28) [TEST]
Test internal memory IC's
29) [FBD]
Feedback delay on/off
30) [RSI]
Reset Card ID’s
31) [SIDn]
Set all Card ID’s
32) [SIDnCi]
Set one Card ID
33) [SID+n]
Set Card ID offset
34) [RSN]
Read Card slot number
35) [HELP]
Display available commands
Group Commands
36) [WR]
Groups multiple cards
37) [RMC]
Remove members from group
38) [RMG] Delete group
39) [RD]
Displays group members
40) [CLRG] Clears group members
41) [CLM]
Delete group