Advantech INTRAC-305 Manual De Usuario
INTRAC-305
OPERATION
© 2011 Advantech Wireless
INTRAC-305 MANUAL - Issue 3.2
Page 23
3
EDIT SATELLITE TABLE
Satellite Number 01
Elevation 33.74
Elevation 33.74
o
Azimuth 162.83
o
Polarization - 90.0
o
Band 1
Frequency 950.000000 MHz
Frequency 950.000000 MHz
1
2
3
4
5
6
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
skips to the Models menu
skips to the Config menu
skips to the System Setup menu
moves the highlight box to the next field
in the current menu
Current Mode Tracking
Control State Local
Beac Freq 11.452000 GHz
Beac Level -10.05 dB
El Angle 25.37
o
Az Angle 210.50
o
Pol Angle 27.4
o
Standby
Home
Models
Config
System
Setup
Function
Press EN to accept selection
Next
Field
Path
HOME - FUNCTION - MENU KEY 6 (X2) - ENTER
or
From Models or System Setup:-
CONFIG - MENU KEY 6 (X2) - ENTER
Description
The INTRAC-305 can store bearing parameters for 40
satellites.
satellites.
This function allows the editing of previously stored data
and/or the addition of new data.
and/or the addition of new data.
Menu Key 6 steps the edit box through the six fields. Using
the numeric keypad enter the satellite’s parameters and the
number it is to be stored under.
the numeric keypad enter the satellite’s parameters and the
number it is to be stored under.
Pressing ENTER sets the new values.
Note 1
The Satellite Number must be between 1 and 40 inclusive.
Note 2
If the frequency is between 12.55GHZ and 12.75GHZ ensure
that the correct band number is set for the down converter
frequency, i.e., band 6 or band 7.
that the correct band number is set for the down converter
frequency, i.e., band 6 or band 7.
(see previous page - Beacon Frequency)
To view the data relating to a satellite number use the Goto
Satellite menu, page 22.
Satellite menu, page 22.