Delta Electronics DELTA DUP-B Manual De Usuario
Chapter 3 Creating and Editing Screens
Revision May, 2010
3-153
Property Description of Dynamic Ellipse Element
Read Address +3
The value of the Read Address+3 can be used
only when Variable Radius option is set to Yes.
It is used to represent the vertical radius of
the element, i.e. the height.
only when Variable Radius option is set to Yes.
It is used to represent the vertical radius of
the element, i.e. the height.
Read Address +4
The value of the Read Address+4 can be used
only when Variable Color option is set to Yes.
It is used to represent the line color. The
range is different depending on selected HMI.
The range for 16 shades of gray model is
within 0 ~ 15, the range for 256 colors model
is within 0 ~ 255 and the range for 65536
colors is within 0 ~ 65536.
only when Variable Color option is set to Yes.
It is used to represent the line color. The
range is different depending on selected HMI.
The range for 16 shades of gray model is
within 0 ~ 15, the range for 256 colors model
is within 0 ~ 255 and the range for 65536
colors is within 0 ~ 65536.
Read Address +5
The value of the Read Address+5 can be used
only when Blink option is set to Yes. When the
value is higher than 1, the dynamic line
element will blink. If the value is 0, it will not
blink.
only when Blink option is set to Yes. When the
value is higher than 1, the dynamic line
element will blink. If the value is 0, it will not
blink.
Read Address
Please note that when Variable Central Point option is set to No,
the internal memory address of Variable Radius option will
increase one (one increment). (Read Address will represent the
horizontal radius of the element. Read Address+1 will represent
the vertical radius of the element. Read Address+2 will represent
the foreground color of the element.)
the internal memory address of Variable Radius option will
increase one (one increment). (Read Address will represent the
horizontal radius of the element. Read Address+1 will represent
the vertical radius of the element. Read Address+2 will represent
the foreground color of the element.)
Line Color
Used to set the display color of the dynamic ellipse element.
Blink
The element can blink to remind the user. (Please refer to Table
3-8-2 Property Description of General Buttons.)
3-8-2 Property Description of General Buttons.)
Foreground Color Used to set the foreground color of the dynamic ellipse element.
Line Size
The unit is Pixel and the range is within 1 ~ 8.
Data Format
It provides BCD, Signed Decimal, Unsigned Decimal and Hex four
kinds of data format to define the read memory content.
kinds of data format to define the read memory content.
Transparent
When this option is selected, the element will display only with the
border and there is no color in the element. The Foreground Color
option will be disabled also.
border and there is no color in the element. The Foreground Color
option will be disabled also.
Variable Central
Point
Point
(Please refer to the description of Read Address above)
Variable Radius
(Please refer to the description of Read Address above)
Variable Color
(Please refer to the description of Read Address above)