Delta Electronics DELTA DUP-B Manual De Usuario
Chapter 3 Creating and Editing Screens
If other project files already exist and are open, the user will get the following dialog box to
remind the user of saving project (Fig. 3-5-2) before creating new project. Press Yes button to
save the existed file, press No button not to save the file and press Cancel button to cancel
the save operation. After the user press the Yes or No button, the new project dialog box will
appear again (Fig. 3-5-1).
remind the user of saving project (Fig. 3-5-2) before creating new project. Press Yes button to
save the existed file, press No button not to save the file and press Cancel button to cancel
the save operation. After the user press the Yes or No button, the new project dialog box will
appear again (Fig. 3-5-1).
圖
3-5-2 Saving dialog box
Input project name, screen name, select HMI model and connecting base port controller (Fig.
3-5-3), and then press OK button.
3-5-3), and then press OK button.
圖
3-5-3 HMI model and base port controller options
3.5.2 Open
Open Old Project. Open current project by choosing File > Open (Fig. 3-5-4) or clicking the
Open icon
from toolbar, or pressing Ctrl + O.
If other project files exist before opening an old project, the user will get the Saving dialog
box (Fig. 3-5-2) to remind the user of saving file and then get the following dialog box for
opening existing dop file (Fig. 3-5-4).
If save operation is complete or there is no old project files, the following dialog box for
opening existing dop file (Fig. 3-5-4) will show up directly.
box (Fig. 3-5-2) to remind the user of saving file and then get the following dialog box for
opening existing dop file (Fig. 3-5-4).
If save operation is complete or there is no old project files, the following dialog box for
opening existing dop file (Fig. 3-5-4) will show up directly.
Revision May, 2010
3-43