Delta Electronics DELTA DUP-B Manual De Usuario
Chapter 3 Creating and Editing Screens
Fig. 3-5-4 Open an old project in ScrEdit
3.5.3 Close
Close Project. Closes project by clicking File > Close.
If project didn’t get saved before issuing the command of closing project, the user will get
saving dialog box (Fig. 3-5-5) to remind the user of saving project. The user can press Yes
button to close the project.
If project didn’t get saved before issuing the command of closing project, the user will get
saving dialog box (Fig. 3-5-5) to remind the user of saving project. The user can press Yes
button to close the project.
Fig. 3-5-5 Saving dialog box
3.5.4 Save
Save the File. Save current project into hard disk with extension file “dop” by choosing File >
Save or clicking the Save icon
, or pressing Ctrl + S. If the project is a new file, the Save as
dialog box will show up (Fig. 3-5-6). If the project is an old file, the Save function will perform
immediately and the Save as dialog box will not show up.
immediately and the Save as dialog box will not show up.
3-44
Revision May, 2010