Black Box FX150A Manual De Usuario

factory-preset OFF, 0 0 *. To turn
the Extension Detection feature ON,
enter the programming mode and
press the following on your tone
phone:

1 Turn ON

0 Extension Detection

* End programming sequence (3

beeps indicate correct entry)

(Optional entries for additional
changes)

* Save changes and exit

programming

Home Routing operates only when
the Lineshare Pro is configured in
the secured mode.

This feature enables the Lineshare

Pro to hold the phone line after a
device disconnects from a call and
then route it to another port, or
“home.” Home is a temporary state
where the caller must enter an
access code, or a single-frequency
protocol tone, to access another
port.

When a call is rerouted home, the

amount of time that the caller has to
select another port is limited by the
Time at Home function. If the caller
does not enter a tone to access
another port during this time, the
Lineshare Pro disconnects the call.

The Home Routing feature is

factory-preset OFF, 0 1 *.

Turn this feature ON if you want to
allow access of multiple ports during
a single call in the secured mode.

To turn Home Routing ON, enter

the programming mode and press
the following on your tone phone:

1 Turn ON

1 Home Routing

* End programming sequence (3

beeps indicate correct entry)

(Optional entries for additional
changes)

* Save changes and exit

programming

When the Lineshare Pro is in the
secured mode, the following features
are affected regardless of their
programming defaults or current
settings:

0 Extension Detection is OFF.

3 No Answer Cascade is OFF.

4 Answer/Disconnect Cascade is

OFF.

5 Pulse Transfer is OFF.

6 Open Line Notification is OFF.

7 Inbound Tone Transfer is OFF.

8 Ring Reduction is OFF.

9 Outbound Tone Transfer is OFF.