Black Box FX150A Manual De Usuario

(For more information about the

secured mode, see Section 4.2)

The Secured Operation feature is

factory-preset OFF, 0 2 *. Turn this
feature ON if you want to limit
access to the Lineshare Pro ports.

To turn Secured Operation ON,

enter the programming mode and
press the following on your tone
phone:

1 Turn ON

2 Secured Operation

* End programming sequence (3

beeps indicate correct entry)

(Optional entries for additional
changes)

* Save changes and exit

programming

No Answer Cascade operates only
when the Lineshare Pro is
configured in the non-secured
mode.

If an incoming call remains

unanswered (on the primary default
port) after the Rings Available count
expires, the No Answer Cascade
feature will automatically route the
call to the next port in the Cascade
Port Order. This feature can be used
for any port. If the last port in the
Cascade Port Order does not answer
the call, the Lineshare Pro
disconnects the call.

The No Answer Cascade feature is

factory-preset ON, 1 3 *.

To turn No Answer Cascade OFF,

enter the programming mode and
press the following on your tone
phone:

0 Turn OFF

3 No Answer Cascade

* End programming sequence (3

beeps indicate correct entry)

(Optional entries for additional
changes)

* Save changes and exit

programming

Answer/Disconnect Cascade
operates only when the Lineshare
Pro is configured in the non-secured
mode.

If an incoming call is answered

from any port and disconnected, the
Answer/Disconnect Cascade feature
will automatically route the call to
the next port in the Cascade Port
Order. This feature can be used for
all four ports. After the last port in
the Cascade Port Order answers a
call, the Lineshare Pro disconnects
the phone line.