Bravetti EP559V2 Manual De Usuario

The whisk is used to beat air into 
mixtures such as egg whites, yolks or 
cream. To insert whisk: There is only 
one whisk provided. Hold whisk at stem 
end and insert into one of the holes 
until it clicks into place. DO NOT PUSH 
WHISK IN FROM THE WIRE END AS 
WIRES MAY BE DAMAGED.

Before using your Bravetti Platinum Pro 
Multi-Use Mixer for the first time, wash 
the beaters, dough hooks, whisk and 
containers in warm, sudsy water. Rinse 
and dry thoroughly. 

To avoid injury when inserting 

or removing beaters, dough hooks, 
whisk, hand blender or chopper, always 
set the speed selector on ”0" and unplug 
the appliance.

Warning: 

The unit is designed for 

intermittent use. The maximum operating 
time on settings “0-Max” is 5 minutes 
non-stop with beaters, dough hooks, or 
whisk. Maximum running time with the 
chopper is 3 minutes and with the hand 
blender 2 minutes.

Select the attachment according to the 
type of mixing required. Make sure that 
the mixer is unplugged from power 
source and speed selector is set on ”0" 
before inserting or removing beaters, 
dough hooks or whisk

.

Use for liquid mixes such as creams, 
egg-whites, confectionery doughs, etc. 
insert stem end of beaters (one at a time) 
into the openings in the mixer. Insert the 
beater with the metal ring in the larger of 
the two holes. The metal ring on the 
beater must sit below the surface of the 
mixer housing. To ease the inserting of 
the beaters, a slight twisting motion will 
aid in engaging the beater drive tabs. 
Install the second beater in the same 
manner as above. (If there is no ring on 
one of your beaters, either beater can be 
inserted into either hole of the mixer.)

Use for light doughs. Insert dough hooks 
in the same way as beaters above.  See 
installing instructions for beaters above. 
Always use both dough hooks. Never try 
to work with one beater and one dough 
hook at the same time. Do not use 
dough hooks at low speeds as this may 
cause motor to overheat. When using 
dough hooks for heavy or thick dough, 
use only high speed (MAX) from the 
beginning to prevent the motor from 
overheating (blocking).

The speed control switch provides 
variable speed selection. 

Please Note: The stick blender 

operates on one 

speed ONLY - for 

safety reasons the 

speed selector 

switch will not 

function with the stick blender.

Never operate the appliance 

without all the parts in place.  Make sure 
that all parts are properly assembled 
before turning on the unit. 

1.  Make sure that the unit is unplugged 

from power source before attaching 
or removing the stick blender.

2.  Remove the unit from the main 

stand and open the safety cover.

3.  Align the arrow on the stick blender 

with the arrow on the main unit. 
Once fully inserted, turn clockwise 
90º to lock.

4.  To avoid spattering, place the stick 

blender first in the food to be beaten 
or chopped and then press the 
blender switch. Do not use the stick 
blender in boiling or very hot 
ingredients. Do not use on stove.

5.  Always release the blender switch 

before removing the stick blender 
from the food, especially when using 
the stick blender in liquids.  
Always hold the unit with your hand 
while processing. Never leave unit 
unattended while plugged in .

Caution: 

Do not use the stick 

blender on the stove. If you want to 
use it in a saucepan while cooking, 
you must first remove saucepan from 
the stove and allow it to cool before 
using the stick blender.

6.  To remove the stick blender from 

the main unit, first unplug the unit 
from the power source and then turn 
the stick blender 90º counter 
clockwise and pull off.

Use the beaker with with the stick 
blender or you can use any other 
container. 
Do not use the beaker in the microwave 
oven. 
Do not use the beaker with beaters, 
whisk or dough hooks.
The beaker is intended only for 
processing small quantities with the stick 
blender.

To avoid spattering, always put beaters, 
dough hooks or whisk into the ingredients 
to be mixed before starting the mixer. 
Make sure that the rear safety cover is 
properly closed, otherwise, for safety 
reasons the unit will not operate.

1.  Select the required speed using 

your thumb to slide the speed 
control switch to the required 
position: “0 - Max”.

are suggested for 

starting and blending dry and liquid 
ingredients, folding in egg whites or to 
break up potatoes for mashing.

are suggested for 

beating  egg whites, yolks or whole 
eggs and whipping cream.

are suggested for all 

medium speed applications as well as 
light cake batters,and whipping cream 
or mashing potatoes. Also for mixing 
bread doughs with the dough hooks.
We recommend that you start at low 
speed and gradually increase the 
speed as required. For difficult or thick 
mixtures, use “MAX” speed from the 
outset to prevent the motor from 
overloading.

Caution: 

When using dough 

hooks for heavy or thick dough, use 
only MAX speed from the outset to 
prevent the motor from overheating. 
Always make sure that the beaters are 
free to rotate properly in the container. 

To avoid personal injury 

and damage to beaters, do not 
attempt to scrape bowl while mixer is 
operating , turn mixer OFF. Should 
scraper or other object drop into bowl, 
turn motor OFF before removing.

set speed selector 

on ’0', unplug unit from power source, 
and press the release button to 
remove the beaters, dough hooks, or 
whisk  from the hand mixer. This 
button only works if the speed control 
switch is set on ’0'.