Behringer X32 DIGITAL MIXER Manual De Usuario

X32 DIGITAL MIXER Preliminary User Manual

The mute group screen allows for quick assignment and control of the console’s 

6 mute groups, and offers two separate functions:
1.  It mutes the active screen during the process of assigning channels to mute 

groups. This ensures that no channels are accidentally muted during the 

assignment process during a live performance.

2.  It offers an additional interface for muting/unmuting the mute groups in 

addition to the dedicated mute group  buttons at the bottom of the console. 

When activated, the mute screen only covers the bottom portion of the 

main display, allowing the middle portion to continue displaying its usual 

screen content. 
To assign channels to one of the 6 mute groups, perform the following steps:
1.  Press the Mute Group button to switch the main display to the mute 

groups view. 

2.  Press and hold the desired mute group button (1-6) on the lower right hand 

corner of the console.

3.  While holding the mute group button, press the select keys of any input or 

output channel, on any layer, that you wish to assign to the mute group.

4.  When you have assigned all the desired channels to the mute group, 

release the dedicated mute group button. The individual channel mute 

buttons will resume their normal function. 

To use the mute groups screen to mute/unmute the groups, perform the 

following steps:
1.  Tap any of the six encoders to mute the corresponding group, and thus mute 

all channels that are assigned to that mute group. 

2.  Tap the encoder of a currently muted group to “un-mute” the mute group.
3.  When finished working with mute groups, tap the Mute Group screen button 

to exit the mute groups screen. The entire screen will again display its full set 

of controls for whatever page it was previously on.