Brother LW6091001 Manual De Usuario

1

2

3

4

5

6

7

8

9

z

Error Messages

The value entered for setting the tape length, tab length, 
multiple copies or numbering function is invalid. Enter a valid 
value for the setting.

The tape length set using the tape length setting is shorter 
than the total length of the left and right margins applied for 
the "Large Margin" cutting option. Select a different cutting 
option. option.

The length of the label to be printed using the text entered is 
longer than the length setting. Edit the text to fit within the set 
length or change the length setting.

The text size is too large. Select a different size option.

There is not enough internal memory available when you try 
to save a label file. Delete any unnecessary files to make 
more memory available for the new label file.

The number of digits entered in the bar code data does not 
match the number of digits set in the bar code parameters. 
Enter the correct number of digits.

The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of 
the bar code data for the CODABAR protocol). Enter the bar 
code data correctly.

There are already 5 bar codes entered in the text data when 
you try to enter a new bar code. You can only use up to five 
bar codes in each label.

The memory available for categories is full. 
To make more memory available, delete any unnecessary 
registered categories by highlighting the category and 
pressing the Clear key.

Tape that is incompatible with the machine has been 
installed. Use compatible tape.

* Press any key to clear the error message.