Barco Printer Accessories II Manual De Usuario

26-0904001-00 Rev 00.00

Parameters:

--con (connector)                : 0-5, see below for connector numbers.
--och (output channel)         : 0-1
--itype (input type)              : 0 = digital, 1 = analog
--brt (overall brightness)

: [50..150]

--cbrt (individual brightness) : [50..150]
--cnt (overall contrast)

: [50..150]

--ccnt (individual contrast) : [50..150]
--col (color)

(must be supplied for --cbrt or --ccnt parameters)

0 = all color

1 = red

2 = green

3 = blue

--sat (saturation)

: [0..125]

--hue (hue)

: [-90..90]

--cinv (color invert)

: 0 = Normal, 1 = Inverted Color

--csp (colorspace)

: 0 = RGB, 1 = YUV

--gamma (gamma)

: 0.3 - 3.0

--mono (monochrome) : 0 = Normal, 1 = Monochrome

Query Format 1 (Input): VIDCOL --con (connector) --?
Query Response 1 : Video Color Settings in the following format

VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright) (b bright) --cnt (ovr
contr) --ccnt (R contr) (G contr) (B contr)
--sat (saturation) --hue (hue) --cinv (invert) --csp (colorspace) --gamma
(gamma) --mono (monochrome)

Query Format 2 (Output): VIDCOL --och (output channel) --?
Query Response 1 : Video Color Settings in the following format

Connectors:

   0=DVI
   1=HD15
   2=HDMI
   3=DP
   4=SDI1
   5=SDI2 (available when Dual option mezzanine installed)

VIEW
Description: View Settings

Required parameters:

--con (connector)
--ch (channel) , required for --percent or --pixel parameters

not required for --units or --save or --recall or --reset

Parameters:

--con (connector) :0-5, see below for input connector numbers.