West Bend A501 - Apple Peeler Manual De Propietario

 

 

Place the rubber base on a smooth, dry table or counter top with the vacuum lever 
toward you and turn the lever from right to left to engage the vacuum grip. 
 
TO SECURE THE CLAMP-ON MODEL 

Slide the peeler onto a table, counter top, or bread board and tighten the clamp 
using your fingers only.  Make sure it is tight enough to be held securely in place. 
CAUTION

:  Using hand tools, such as pliers, may damage your peeler and will void 

the warranty. 

With your Peel Away

™ 

Peeler

 

assembled, you need to align the peeling and cutting 

blades.  You will want to realign the blades on your peeler from time to time.  To 
adjust the peeling arm you will need a screwdriver. 

To check the adjustment of the coring/slicing blade, push down the shaft lever and 
pull the shaft to the right, so the fork passes through the coring ring on the 
coring/slicing blade.  If the fork does not pass cleanly through the coring ring, loosen 
the thumb screw on the coring/slicing blade, adjust the blade until the fork passes 
cleanly through it, then tighten the thumb screw. 
 

 

3

The peeling blade should be centered on the peeling arm and protrude about ⅛ inch 
past the head of the peeling arm.  To adjust the peeling blade, loosen the peeling 
blade thumb screw, move the blade to the proper position, and tighten the thumb 
screw.