Инструкции Пользователя для West Bend A501 - Apple Peeler
Clamp-on Style
Vacuum-grip Style
TO SECURE THE VACUUM GRIP MODEL
Place the rubber base on a smooth, dry table or counter top with the vacuum lever
toward you and turn the lever from right to left to engage the vacuum grip.
TO SECURE THE CLAMP-ON MODEL
toward you and turn the lever from right to left to engage the vacuum grip.
TO SECURE THE CLAMP-ON MODEL
Slide the peeler onto a table, counter top, or bread board and tighten the clamp
using your fingers only. Make sure it is tight enough to be held securely in place.
CAUTION
using your fingers only. Make sure it is tight enough to be held securely in place.
CAUTION
: Using hand tools, such as pliers, may damage your peeler and will void
the warranty.
A
LIGNING
Y
OUR APPLE PEELER
With your Peel Away
™
Peeler
assembled, you need to align the peeling and cutting
blades. You will want to realign the blades on your peeler from time to time. To
adjust the peeling arm you will need a screwdriver.
adjust the peeling arm you will need a screwdriver.
CORING/SLICING BLADE
To check the adjustment of the coring/slicing blade, push down the shaft lever and
pull the shaft to the right, so the fork passes through the coring ring on the
coring/slicing blade. If the fork does not pass cleanly through the coring ring, loosen
the thumb screw on the coring/slicing blade, adjust the blade until the fork passes
cleanly through it, then tighten the thumb screw.
pull the shaft to the right, so the fork passes through the coring ring on the
coring/slicing blade. If the fork does not pass cleanly through the coring ring, loosen
the thumb screw on the coring/slicing blade, adjust the blade until the fork passes
cleanly through it, then tighten the thumb screw.
PEELING BLADE
3
The peeling blade should be centered on the peeling arm and protrude about ⅛ inch
past the head of the peeling arm. To adjust the peeling blade, loosen the peeling
blade thumb screw, move the blade to the proper position, and tighten the thumb
screw.
past the head of the peeling arm. To adjust the peeling blade, loosen the peeling
blade thumb screw, move the blade to the proper position, and tighten the thumb
screw.