White Rodgers 1F81-261 White-Rodgers 80 Series Programmable Multi-stage Thermostat Instruccion De Instalación

7

Follow these steps to enter the heating and cooling programs
you have selected.

1.  Press TIME  button  once. The  display  will  show  the  hour

only.

EXAMPLE:

PM

2.  Press and hold either

 or 

 until you reach the correct 

hour and AM/PM designation (

AM begins at midnight; PM 

begins at noon).

3.  Press TIME once. The display window will show the minutes

only.

EXAMPLE:

4.  Press and hold either

 or 

 until you reach the correct 

minutes.

5.  Press  TIME  once.  The  display  will  show  the  day  of  the

week.

6.  Press

  or 

  until  you  reach  the  current  day  of  the 

week.

7.  Press RUN once. The display will show the correct time and

room temperature alternately.

1.  Move the SYSTEM switch to

HEAT.

2.  Press PRGM once. “

MO TU WE TH FR” (indicating weekday

program) will appear in the display. Also displayed are the
currently programmed start time for the 

1st heating period 

and the currently programmed temperature (flashing).

EXAMPLE:

AM

MO TU WE TH FR

This display window shows that for the 1st weekday period,
the start time is 6:00 AM, and 68° is the programmed tem-
perature (this example reflects factory preprogramming).

3.  Press

 or 

 to change the displayed temperature to your 

selected temperature for the 1st heating program period. 

4.  Press TIME once (the programmed time will flash). Press

 or 

 until your selected time appears. The time will 

change in 15 minute increments. When your selected time 
is displayed, press TIME again to return to the change tem-
perature mode.

5.  Press PRGM once. The currently programmed start time and

setpoint temperature for the 

2nd heating program period will 

appear.

6.  Repeat steps 3 and 4 to select the start time and heating

temperature for the 2nd heating program period.

7.  Repeat steps 3 through 5 for the 3rd and 4th heating program

periods. Weekday heating programs are now complete.

8.  Press PRGM once. “

SA” (indicating Saturday program) will

appear in the display, along with the start time for the 1st heat-
ing period and the currently programmed temperature.

9.  Repeat  steps  3  through  7  to  complete  Saturday  heating

programming.

10. Press PRGM once. “

SU” (indicating Sunday program) will ap-

pear in the display, along with the start time for the 1st heating
period and the currently programmed temperature.

11. Repeat steps 3 through 7 to complete Sunday heating pro-

gramming.

12. When you have completed entering your heating program,

press RUN.

1.  Move SYSTEM switch to

COOL position.

2.  Follow  the  procedure  for  entering  your  heating  program,

using your selected cooling times and temperatures.

Follow these steps to check your thermostat programming one
final time before beginning thermostat operation.
1.  Move SYSTEM switch to

HEAT position.

2.  Press PRGM to view the 1st weekday heating period time and

temperature. Each time you press PRGM, the next heating
period time and temperature will be displayed in sequence for 
weekday, then weekend program periods (you may change
any time or temperature during this procedure).

3.  Press RUN.
4.  Move SYSTEM switch to

COOL position.

5.  Repeat step 2 to check cooling program.
6.  Move SYSTEM switch to

HEAT or COOL and press RUN to

begin program operation.