Utica Boilers PEG E Series Instruccion De Instalación

Burn, scald hazard. Pressuretrol must be installed 

by a qualified service agency in accordance with 

manufacturer’s instructions, all applicable codes and 

requirements of authority having jurisdiction. Failure to 

follow the information in these instructions exactly will 

result in death or serious injury. Qualified service agency 

is responsible for proper installation.

!  

Installation Instructions: See Figure 4.

Attach pressuretrol assembly (A) to site glass 

assembly, using proper pipe sealant.

Remove pressuretrol cover. 

Route wire harness through black plastic bushing (B). 

Attach two wires. Wires are not polarity sensitive, can 

place on either terminal.

Replace pressuretrol cover.