Schwinn 460 Manual De Usuario

No display/partial display/unit 

will not turn on

Electrical (wall) outlet

If outlet does not function, use a properly 

functioning outlet.

Connection at front of unit

Connection should be secure and undamaged. 

Replace adapter or connection at unit if damage 

appears.

Main console cable integrity

Replace cable if wires appear crimped or cut.

Main console cable connections/

orientation

Confirm cable is connected securely at the back 

of the console and at the base of the console 

mast.

Console display for cracks or other 

damage

Replace console if damaged.

Console Display

Replace computer  if console only has partial 

display.

Unit operates but Telemetric 

HR not displayed

Chest Strap

Make sure strap is directly against skin and 

contact area is moist. Strap should be Polar

®

 

compatible.

Interference

Try moving unit away from sources of interference 

(TV, Microwave, etc).

Chest Strap

Connect strap to a functioning Polar

®

 compatible 

device to see if it works. If it does not function, 

replace strap. If strap works with other devices 

but not with the Schwinn

®

 460, replace HR 

receiver.

No speed/RPM reading

Main console cable integrity

All wires in cable should be intact. Replace cable 

if wires appear crimped or cut.

Main console cable connections/

position

Confirm cable is securely connected and 

properly positioned. Small latch on connector 

should line up and snap into place.

Magnet position (requires shroud 

removal)

Replace flywheel or entire main assembly if you 

do not see a magnet.

RPM Sensor (requires shroud 

removal)

RPM sensor should be aligned with magnet 

and connected to data cable. Re-align sensor 

if necessary. Replace if there is any damage to 

sensor or connecting wire.

Owner’s Manual