Schwinn 460 Manual De Usuario

Console shuts off (enters sleep 

mode) while in use

Main console cable integrity

All wires in cable should be intact. Replace cable 

if wires appear crimped or cut.

Main console cable connections/

position

Confirm cable is securely connected and 

properly positioned. Small latch on connector 

should line up and snap into place.

Magnet position (requires shroud 

removal)

Replace flywheel or entire base assembly if you 

do not see a magnet.

RPM Sensor (requires shroud 

removal)

RPM sensor should be aligned with magnet 

and connected to data cable. Re-align sensor 

if necessary. Replace if there is any damage to 

sensor or connecting wire.

Unit operates but Contact HR 

not displayed

HR cable connection at console

Confirm cable is connected securely to console.

Sensor grip

Confirm hands are centered on HR sensors. Hands 

must be kept still with relatively equal pressure 

applied to each side.

Dry or calloused hands

Sensors may have difficulty with dried out or 

calloused hands. A conductive electrode cream 

such as Buh-Bump™ can help make a better 

conduct. Purchase online at medical or large 

fitness stores.

Handlebars

Replace handlebars if tests reveal no other 

issues.

Unit rocks/does not sit level

Leveler adjustment on front 

stabilizer

Level the machine by turning the feet in or out.

Surface under unit

Move machine to level area if adjustments do not 

compensate for unlevel surfaces.

Foot pedals loose/unit difficult 

to pedal

Hardware

Tightly secure all hardware on pedal arm, sub 

pedal arm, and handlebars.

Owner’s Manual