Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

In some cases, it may be necessary to upgrade the embedded software of the MP.11/a by downloading 
an image file.  To download an image file through the Web Interface: 

1.  Set up the TFTP server as described in “TFTP Server Setup” 

  

2.  Access the MP.11/a as described in “Web Interface Overview” 

  

3. Click 

the 

Commands button and the Download tab. 

4.  Fill in the following details: 

Server IP Address <IP address TFTP server> 
File Name <image file name> 
File Type Image 
File Operation Download 

 

5. Click OK to start the file transfer. 

The MP.11/a downloads the image file. The TFTP server program should show download activity after a 
few seconds.  When the download is complete, the MP.11/a is ready to start the embedded software. 

You can back up the MP.11/a configuration by uploading the configuration file.   You can use this file to 
restore the configuration or to configure another MP.11/a (see “Configuration Restore” 

To upload a configuration file through the Web Interface: 

1.  Set up the TFTP server as described in “TFTP Server Setup” 

2.  Access the MP.11/a as described in “Web Interface Overview” 

 

3. Click 

the 

Commands button and the Upload tab. 

4.  Fill in the following details: 

Server IP Address <IP address TFTP server> 
File Name <configuration file name> 
File Type Config 
File Operation Upload 

5. Click OK to start the file transfer. 

The MP.11/a uploads the configuration file. The TFTP server program should show upload activity after 
a few seconds.  When the upload is complete, the configuration is backed up.