Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

You can show CLI help by entering help at the command prompt. The CLI also provides context-specific 
help. For help in a specific situation, enter ?.   

You can get help as follows: 

display the 
command list 

? 

s? 

display commands 
that start with 
specified letters 

The more letters you enter, the fewer the results returned.   
Enter one or more letters, then ? with no space between letters and ? 

download ? 

display parameters 
for set and show 
commands 

Lets you see every possible parameter for the set or show commands 
Enter the command, a space, then ? 

download ? 
download 169.254.128.133 ? 
download 169.254.128.133 image.bin ? 
download 169.254.128.133 image.bin image 

display prompts for 
successive 
parameters 

Enter the command, a space, and then ?.  Then, when the parameter prompt 
appears, enter the parameter value.  The parameter is changed and a new 
CLI line is echoed with the new value.   
After entering one parameter you can add another ? to the new CLI line to 
see the next parameter prompt, and so on until you have entered all the 
required parameters. 

 
Note that the Boot Loader CLI does not have command help. 

The quit, done, and exit commands are used to disconnect and close the current CLI session. 

The download command is used to transfer files from the TFTP server to the MP.11/a.  Executing 
download in combination with the asterisk character (*) makes use of the previously set TFTP 
parameters.  Executing download without parameters displays command help and usage information.