Topcom LUCCA Answering Machine Manual De Usuario

Lucca

Lucca

Please observe the following safety instructions when using your LUCCA digital
answering machine.

1. Read this manual carefully.
2. Never place the answering machine on an unstable surface.
3. Do not install the machine in a damp or dusty environment.
4. Do not place the machine in the vicinity of a source of heat such as a fire or a

radiator.

5. Only use a damp cloth to clean the machine.
6. Never remove screws or lids to repair the machine yourself. Leave this to the

TOPCOM TELECOM SYSTEMS Technical Service.

7. Pull the power plug immediately out of the machine if:

a the power supply cord or the AC adaptor have been damaged;
b the machine has become wet;
c the machine has been dropped and severely damaged.

8. Slots and openings in the machine protect it from overheating. These open-

ings may not be blocked.

1. Place the answering machine on a hard flat surface.
2. Insert a 9V battery into the battery compartment.
3. Insert the small plug of the adaptor in the back of the machine.
4. Plug the AC adaptor in the AC wall outlet.

NOTE: First check whether the AC adaptor is suitable for the voltage of the
power network to which you want to connect it. The voltage is printed on the
AC adaptor.

5. During initialization memory is tested. Display counts down from 11 to 0.
6. You  can  start  using  your  LUCCA  digital  answering  machine  as  soon  as  you

hear “Announcement one on” (“Ansage eins ein”).

Your digital answering machine mentions day and time of message entry during
playback.  “Day”  means  the  day  of  the  week  (Monday,  Tuesday,…)  and  not  the
date. Time is indicated according to the English am/pm system.
The machine is preset to: Monday, 12:00 am. You can check day/time setting at
any moment by pressing the TIME button. The machine will say its current set-
ting.

Proceed as follows to change the setting:

1. Press the TIME button for 1,5 second until the machine says which day it is

according to its setting.

2. Press the FAST FORWARD button to select a following day or the REWIND but-

ton to choose an earlier day. Each time you press one of these buttons, the
machine says which day you have selected.

3. If you have reached the right day, press the TIME button to set the machine to

the selected day. Now the machine will say the hour to which it is set.

4. Press the FAST FORWARD button to select a later hour or the REWIND button

to  select  an  earlier  hour.  Each  time  you  press  one  of  these  buttons,  the
machine says the hour you have selected.

5. If  you  have  reached  the  right  hour,  press  the  TIME  button  to  confirm  the

selected hour. Now the machine will say the minutes after the hour to which it
is set.

6. Press the FAST FORWARD button to select a later minute setting or press the

REWIND button to select an earlier minute setting. Each time you press one of
these buttons, the machine says which minute setting you have selected.

7. If you have reached the right minute setting, press the TIME button to confirm

the selected minute setting.

8. The machine will say the set day, hour and minutes to confirm your settings.
9. If,  during  one  minute,  no  button  is  pressed,  the  machine  will  automatically

leave the setting mode and return to the previous mode.