Extron electronic Multi-Graphic Processor MGP 464 Manual De Usuario

The Auto Image menu causes the MGP 464 to perform an automatic image 

adjustment in the selected window.  Auto Image measures where the active area 

starts and stops, and adjusts input sampling accordingly, so that the image fills the 

window.
When an input is connected, the processor measures the sync frequencies of 

the incoming video source and sets the active image area, total image area, and 

sampling frequency according to a table stored on the MGP.  If an unknown input 

is connected to the MGP, the processor measures and estimates the resolution of the 

incoming video.  If the estimate proves not to be accurate, the Auto Image function 

makes measurements to more accurately set up the input sampling.

Menu

Use either Adjust knob
to select a submenu option.

Next

Select the window on which
to perform an Auto Image.  
Select NA to exit the menu 
without performing the 
Auto Image adjustment.

Next

To perform an Auto Image adjustment,

. 

Press the Menu button once to display the Auto Image menu.

. 

Press the Next button once to display the available option.

. 

Rotate the horizontal (

[

) or vertical ({) Adjust knob to select the window for 

which you want to perform Auto Image.

. 

Press Next again to perform the Auto Image.

. 

If desired, repeat steps 3 and 4 for any other windows for which you want to 

perform an automatic image adjustment.

. 

When finished with Auto Image, do one of the following:

   

• 

Select NA and press Next.

   

• 

Press the Menu button.

   

• 

Do nothing and wait for the menu to time out.