Extron electronic Multi-Graphic Processor MGP 464 Manual De Usuario

The MGP 464’s menus enable you to configure the processor.  The menu navigation 

buttons (Menu and Next) are located to the lower left of the LCD screen.  Press 

these buttons to cycle through the available menu and submenu options.  

The MGP 464’s menu system consists of a main menu with nine options (menus).  

Each of these menus has a set of submenus, which enable you to make desired 

adjustments.  (See the diagram on page 3-7.)

To use the menus to configure the system,

N

. 

— To access the Main menu, press the Menu (left) button, located 

below and to the left of the LCD screen.  The first Main menu option (Auto 

Image) is displayed on the screen.

. 

— By repeatedly pressing the Menu button, you 

display additional Main menu options.  Press the Menu button repeatedly 

until the desired menu is displayed.

. 

— When the Main menu item that you want to configure is 

displayed on the LCD screen, press the Next button (at the right of the Menu 

button) to cycle through the displayed menu’s submenu options.

. 

— The third level of menu selections consists of sub-menu 

options that are selected by turning the horizontal (

[

) and vertical ({) 

Adjust knobs.  When you have displayed the submenu option that you want 

to configure, turn the knobs clockwise or counterclockwise to display each 

available parameter for the selected option.

. 

 — To save and implement the adjustments you have 

selected, do one of the following:
•  Press Next to display another submenu option to adjust.
•  Press Menu repeatedly until the Exit menu screen appears, then press 

Next.

•  Do nothing, and wait until the LCD screen returns to the default cycle.

Your adjustments remain in effect until you change them or reset the unit to factory 

defaults (see “Resetting,” later in this chapter).