Ecom Instruments Lite-Ex LED 30 Manual De Usuario

For this product,  ecom instruments
GmbH guarantees the function and
material for a period of two years under
normal operating and maintenance con-
ditions.
The guarantee does not apply to 
products which are improperly used,
modified, neglected, damaged in  
accidents or exposed to abnormal ope-
rating conditions.

Claims under the guarantee can be
made by returning the defective equip-
ment to the factory. We reserve the
right to repair, renew the settings or
exchange the device.

The above-mentioned guarantee condi-
tions are the sole and only rights of the
purchaser to compensation, are exclu-
sively valid and replace all other con-
tract or legal warranty obligations.
ecom instruments GmbH accepts no
responsibility for special, direct, indirect,
accompanying or consequential  
damage as well as losses including the
loss of data which may arise through
the use or acquisition of the equipment
independent of whether it was caused
by violation of the warranty obligation,
lawful or unlawful action, action in good
faith or any other action.  

If in certain countries the limitation of a
legal guarantee as well as the exclu-
sion or limitation of accompanying or
consequential damage is not permissi-
ble, it may be that the above-mentioned
limitations and exclusions are not valid
for every purchaser. Should any such
clauses of these guarantee terms be
declared null and void or not realisable

19

18

ensure that only type-approved batteries
are used (see table of type-approved 
batteries in section 6 of the technical
details).

The batteries must only be changed out-
side of the Ex-hazardous area.

The use of any other type of batteries is
strictly forbidden in that it will invalidate
the Ex-data certification.

To change the batteries, first remove the
safety screw – using a suitable 
screwdriver. The base cap can now be
removed - by unscrewing in an
anticlockwise direction.

The batteries can now be removed.

Before fitting new batteries ensure that
the contacts of the new batteries and
those in the torch are clean. After the
batteries have been inserted, refit the
base cap and secure with the safety
screw. 

Please check that the sealing ring has
not become damaged when opening and
closing the torch 

(ref. special conditions see paragraph 4.3).

Should any repairs or service be neces-
sary, then the conditions of ELEX V must
be complied with. It is recommended that
the manufacturer carry out such repairs
in order to check for the safe functioning
of the protective circuits.

The unit should only be cleaned with a
suitable cloth or sponge. Do not use 
solvents, abrasives or other cleaning
solutions.

BAL_Lite-Ex 30_8sprach  26.02.2003  8:47 Uhr  Seite 18