KYOCERA VLSG-01 Manual De Usuario

VanLink System Requirements

2-3

Cables should only be installed by qualified personnel who are familiar with the electrical 
requirements and safety precautions that are necessary to properly and safely install 
(run) these items.

The cables should be inspected prior to installation. Connectors should be visually 
inspected prior to connecting to their mating connector.

The V750 cable and connector requirements are as follows:

•

Cabling consisting of four (4) wires will be required between the V750 and the 
pan/tilt for azimuth and elevation feedback. 

— Some pan/tilts may already have the potentiometers installed in which case the 

wires needed may already be terminated and run through the NYCOIL. 

•

The harness for the GPS/IMU can be extended to reach the roof of the vehicle if 
necessary.

Refer to 

p/n
TBD