Country Home Products DR LEAF & LAWN VACUUM Manual De Usuario

In addition to vacuuming and chipping with the DR LEAF and LAWN VACUUM, the system also allows you 
to discharge material for mulch in a specific area.  This attachment is used in conjunction with the hand 
vacuum attachment.  The vacuum attachment hose is used to vacuum the material out of the Collector Box.  

 

1.  Disconnect the Collector Box Inlet Hose from the 

Blower Exit Elbow Assembly by releasing the two 
(2) Flexible Latches (Figure 10). 

 

2.  Push the Collector Box Inlet Hose behind the 

Blower Exit Elbow (Figure 11), connect the Mulch 
– Discharge Hose to the Blower Exit Elbow, and 
secure in place with the two (2) Flexible Latches 
(Figure 11). 

3.  Disconnect the Blower Inlet Hose from your lawn 

tractor Hose Adapter (Figure 2

 

on page 4) and 

connect the Hand Vacuum Hose to the Blower 
Inlet Hose (Figure 3

 

on page 4). 

4.  Remove the Rear Panel of the Collector Box.

 

5.  Direct the Mulch-Discharge hose in the selected 

area to receive the material (Figure 12), start the 
engine and adjust the Throttle to Fast (Rabbit).   

Tip:  Avoid dragging the Mulch-Discharge and 

Vacuum Hoses over curbs, stonewalls, or piles 
of cut branches.  The hoses are tough, but can 
puncture on sharp objects. 

Tip: You may want to place stones beside the end of 

the hose to position and direct the discharge.

 

6.  Vacuum out the Collector Box using the Hand 

Vacuum Attachment (Figure 12).

 

CALL TOLL FREE 1-800-DR-OWNER         8