American Power Conversion AIRACPA4000 Manual De Usuario
®
®
®
®
ADDENDUM
NetworkA
IR ACPA4000
15
Use FTP or SCP to upgrade one Network
Management Card
Management Card
For you to be able to use FTP to upgrade a single Network Management
Card over the network:
Card over the network:
• The Network Management Card must be connected to the network.
• The FTP server must be enabled at the Network Management Card.
• The Network Management Card must have its TCP/IP settings
(
System IP
,
Subnet Mask
, and
Default Gateway
addresses)
configured.
To use FTP to upgrade the Network Management Card:
1. Open an MS-DOS command prompt window on a computer that is
connected to the network. Go to the directory that contains the
firmware upgrade files, and list the files. (For the directory
firmware upgrade files, and list the files. (For the directory
C:\apc
, the
commands would be those shown in
bold
):
C:\>
cd\apc
C:\apc>
dir
Files listed for a Network Management Card, for example, might be the
following:
following:
–
apc_hw02_aos_228.bin
–
apc_hw02_nairpa_106.bin