Burnham Blowdown Heat Recovery System Prospecto
Blowdown Heat Recovery System
Flash Economizer
•
Reduces dissolved solids from the top level of water
in the boiler.
•
Recovers heat from surface blowdown to heat boiler
feed or make-up water.
•
ASME Section VII code-stamped flash separator and coil.
•
Separator is sized to accommodate a given percent
surface blowdown/flow rate from boiler operating
pressure to a given vent psig.
pressure to a given vent psig.
•
Coil is sized to accommodate make-up flow rate at
between 8 and 18 psig pressure drop.
•
Model Range: HR-39 (3 GPM blowdown/9 GPM make-up)
through HR-30150 (30 GPM blowdown/150 GPM make-up).
•
Complete system configured to include: flash separator
mounted above and flanged to a stainless steel or copper
coil on stainless steel stand with trap, ball valve, gauge
glass, safety valve, 3 thermometers and factory piping.
coil on stainless steel stand with trap, ball valve, gauge
glass, safety valve, 3 thermometers and factory piping.
•
Stainless steel striking plate standard.
•
Flash separator flanged to coil section for ease or removal
for cleaning.
•
Openings to facilitate cleaning and inspection standard.
•
Options include multiple boiler manifold and mounting
of conductivity controller.