Burnham Blowdown Heat Recovery System Dépliant

Blowdown Heat Recovery System

•

   Reduces dissolved solids from the top level of water  

in the boiler.

•

   Recovers heat from surface blowdown to heat boiler  

feed or make-up water.

•

   ASME Section VII code-stamped flash separator and coil.

•

   Separator is sized to accommodate a given percent  

surface blowdown/flow rate from boiler operating  
pressure to a given vent psig.

•

   Coil is sized to accommodate make-up flow rate at  

between 8 and 18 psig pressure drop.

•

   Model Range: HR-39 (3 GPM blowdown/9 GPM make-up) 

through HR-30150 (30 GPM blowdown/150 GPM make-up).

•

   Complete system configured to include: flash separator 

mounted above and flanged to a stainless steel or copper 
coil on stainless steel stand with trap, ball valve, gauge 
glass, safety valve, 3 thermometers and factory piping.

•

   Stainless steel striking plate standard.

•

   Flash separator flanged to coil section for ease or removal 

for cleaning.

•

   Openings to facilitate cleaning and inspection standard.

•

   Options include multiple boiler manifold and mounting  

of conductivity controller.