McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual De Usuario
B-11
Initial Power-On Procedure
5. Turn the power switch(es) to the On (
⏐
) position (this activates the
systems initial loading routine). The power switch is located
directly above the power cord, see Figure B-4.
directly above the power cord, see Figure B-4.
Verify status with the indicator lights and the Alphanumeric
messages
messages
window display on front of the unit. (See the “Indicators,
Switches, and Interfaces” section in Chapter 2 for descriptions of the
indicators and alphanumeric displays or the “LED Diagnostic Codes”
section in Chapter 13, Troubleshooting and Diagnostics).
indicators and alphanumeric displays or the “LED Diagnostic Codes”
section in Chapter 13, Troubleshooting and Diagnostics).
Figure B-4
Power Supply Switch
After power up, the diagnostic display will toggle between VXOK
and BOTP. The UltraNet Edge 3000 is then ready for the UltraNet
ConfigManager configuration.
and BOTP. The UltraNet Edge 3000 is then ready for the UltraNet
ConfigManager configuration.
Figure B-5
Diagnostic Display
Sb035
I
Sb108