Gaggenau CM210710 Manual

Display indicates the settings, the processes which are 
running and any messages issued by the appliance.

The appliance has been programmed with standard 
settings for optimum operation. These settings can be 
changed – see chapter “Changing settings / 
programming”.

V

The appliance is switched on or set to standby mode with 
button 

V.

When button 

V is pressed, the appliance heats up and 

is then rinsed. The illuminated ring on button 

V flashes 

during this process.

The appliance is not rinsed if:

– the appliance was still warm when switched on or
– coffee was not discharged before the appliance was 

switched to “standby” mode.

Heating and washing processes are displayed.

While coffee is being brewed, button 

V is assigned 

a stop function. The process is terminated by pressing 
button 

V.

4 hours after the last coffee was brewed, 
a rinsing process is automatically initiated and 
the appliance switches to “standby” mode. 
These settings can be changed – see chapter 
“Changing settings / programming”.

Espresso or coffee can be brewed by pressing the 
n buton. The green illuminated ring flashes while 
espresso or coffee is being brewed.

If the 

n button is pressed again, the coffee brewing 

process is terminated.

UNIT is
heating

unit is
rinsing