Gaggenau CM210710 Manual
18
Push down the sleeve a on nozzle.
Fill a cup approx.
1
/
3
full of milk.
Immerse nozzle approx.
3
/
4
" (2 cm) into the milk.
Slowly rotate function selector to
=.
The appliance now heats up for approx.
20 seconds. Then the milk is frothed.
20 seconds. Then the milk is frothed.
The frothy milk can be optimized by rotating the cup
slowly.
slowly.
End the process by rotating the function selector
back to
back to
) position.
Note: When nozzle has cooled down, clean immediately
– see “Cleaning the appliance / Cleaning the nozzle”.
Dried residue is very difficult to remove and impairs
formation of the frothy milk.
– see “Cleaning the appliance / Cleaning the nozzle”.
Dried residue is very difficult to remove and impairs
formation of the frothy milk.
Tip: Preferably use semi-skimmed milk.
m
WARNING
m
Avoid the risk of scalding!
When the function selector is set to
When the function selector is set to
=, the nozzle
may spurt slightly. Escaping steam is very hot.
Do not touch nozzle 12 or direct at people!
Do not touch nozzle 12 or direct at people!
Preparing frothy milk