Thermador CET365NS Manual De Propietario

12

The cooktop is equipped with a residual heat indicator 

for each element. It shows you which elements are still 

hot. Avoid touching the indicated elements.
If an 

• 

is shown on the display, the element is still hot. 

You could use it, for example, to keep a small quantity of 

food warm or to melt a chocolate coating. As the element 

continues to cool, the display changes to 

œ

. The display 

goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on 

after a power failure. The display lights up for 

approximately 30 minutes.

Use the main switch to turn on the electronic circuitry for 

the control panel. The cooktop is now ready to use.

Turning the cooktop on
Touch the ON/OFF key until the 

"

 indicator turns on.

Turning the cooktop off
Touch the ON/OFF key until the 

" 

turns off. The residual 

heat indicators will remain on until the elements have 

cooled off sufficiently.
Note:  The cooktop switches off automatically when all 

the elements have been switched off for more than 20 

seconds.
The residual heat indicator remains lit until the elements 

have cooled down sufficiently. 

•

/

œ

 is displayed next to 

the corresponding element symbol.

This section will show you how to set the elements. The 

table contains details on the heat settings for a variety of 

dishes.

Setting the element
Select the desired heat level using the number keys 1 

to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is 

indicated by .

†

 and is set using 

@

 and 

A

.

ò

Triple element

On this element you can turn the medium and large heating rings off. 

The heating element must be turned on.
Turning off the outer heating ring: Touch PAN SIZE. The 

ò

 display will 

turn off.
Turning off the middle heating ring: Touch PAN SIZE again. The 

ð

 

display will turn off.
When you turn the heating element on again, all of the heating rings will 

be on.

à

Bridge element (only CET366NS)

The Bridge element combines two individual heating elements into one 

long griddle zone. This configuration is ideal for griddles and large 

pans.
Turning on the Bridge element: Touch BRIDGE. The 

à

 symbol will 

appear; both heating elements are now selected. 

‹

 appears in both dis-

plays. Within the next 10 seconds select the desired heat setting (1-9). 

The Bridge element and both individual heating elements are now on.
Changing the heat setting: Touch one of the two 

$

 touch keys for 

selecting the Bridge element, and set the new heat level within the next 

10 seconds.
Turning off the Bridge element feature: Touch BRIDGE. 

‹

 appears in 

both displays. The heating elements will turn off after about 10 seconds, 

and the residual heat indicator will appear.