Thermador CIT36XKB Manual De Propietario

16

The cooktop must be switched on.

Touch the 

õ

 symbol. The settings menu is displayed.

Touch the Clock symbol 

M

. The clock format and the 

time set are shown in the display.

Select the desired clock format. Set the clock by 

selecting minutes or hours, and sliding up or down.

Touch ENTER. The clock is set.

If you wipe over the display while the cooktop is switched 

on, settings may be altered. To prevent this from 

happening, your cooktop provides Clean Lock function.
To switch on: touch the lock symbol 

ó

. In the lock 

screen, touch Clean Lock symbol 

í

. The display is 

locked for 20 seconds. The remaining duration appears 

in the display. You can now wipe over the display without 

altering any settings.

Switching off: In order to switch off the display lock 

before the time elapses, touch the Unlock symbol 

ô

 and 

then the “CONTINUE” display area.
Note:  The main switch is excluded from the display lock. 

You can switch off the cooktop at any time.

You can use the Panel Lock to prevent children from 

changing settings on the cooktop.
Note:  If a cooking position is switched on, the Panel 

Lock is not available.

The cooktop must be switched on.
To switch on: touch the lock symbol 

ó

, in the lock 

screen, touch Panel Lock symbol 

ó

. The cooktop is 

locked.
To switch off: touch the Unlock symbol 

ô

 and then the 

“CONTINUE” display area. The cooktop is unlocked.
Note:  There are different settings available for the child 

lock (automatic, manual, off). To find out how to change 

the settings, see section Settings.

With the Timer, you can set a time up to 9 hours, 59 

minutes and 59 seconds. It runs independently from the 

heating functions of the cooktop.
This function does not automatically switch off a cooking 

position.

Touch the 

ñ

 symbol. 0 : 00 : 00 appears in the display.

Slide your finger up or down and set the desired 

amount of time in minutes.

Select hours and seconds. Slide your finger up or 

down and set the desired amount of time.