Kobe CHX9130SQB1 Instruccion De Instalación
12
Install Accessories
15. Install the Oil Tunnel {G} into recess support
near rear of hood. Refer to Figure 19.
16. Install Baffle Filters {H} and Stainless Steel
Spacers {I}.
Angle baffle filter toward
back of hood.
Push the baffle filter up
until almost level.
Slide forward into
recess behind the front of hood.
Lower
baffle filter.
Slide back until it fits into
resting position. Refer to Figure 20.
17. For Stainless Steel Spacer, follow above
steps.
Final Installation
18. Turn power ON in control panel. Check all
lights and fan operation.
19. Make sure to leave this manual for the
homeowner.
Figure 19
Figure 20