Marvel M18AFWPL Hoja De Especificaciones

22

•  Anti-tip mounting bracket must be installed correctly 

and anchored to prevent cabinet from tipping forward.

•  Module should be engaged in the slots on the module 

positioning brackets and seated on the foam seal with-

out air gaps. Module positioning brackets should not be 

removed.

•  All wires from the lower cabinet to module must be 

securely connected. If a problem is suspected, inspect 

both male and female plugs and ensure that the termi-

nals in the plug are sufficiently forward to engage.

•  Cabinet must be level both side-to-side and front-to-

back. Front leveling legs should rest firmly on the floor.  

Cabinetry on both sides of the cabinet must be secure 

and level to prevent the cabinet from shifting when the 

doors are opened.

•  Doors must not hit adjacent walls or countertops.

•  Gaskets must seal completely. If gaskets seal well, no 

further adjustments need to be made.

•  Do NOT overcrowd the shelves or block cold air ducts.

•  Do NOT install a  freezer shelf closer than 8 inches 

from the interior top. 

 

•  Do NOT allow packages to overhang sides or rear of 

shelves as this will block air circulation, making the  

freezer less efficient.

•  Any air leaks between the module and the cabinet will 

keep the cabinet from operating efficiently.

•  The electric outlet must be located in a manner that will 

not interfere with module to cabinet alignment when the 

unit is pushed into place.

•  Power cord to outlet sitting under the power module will 

create an air leak.

•  Plugs from cabinet not connected to the power module.

•  Floor under products lower than finished floor making 

the unit inaccessible for service. Floor under product 

must be strong enough to support weight of fully loaded  

freezer.

•  Product not anchored properly (to prevent tipping).  

Bracket not secured to rear wall studs.

•  Failure to properly level the cabinet and/or power mod-

ule can result in defrost water overflowing.