Monogram ZV1050SFSS Instruccion De Instalación
15
Installation Instructions
STEP 12 INSTALL FILTERS, FINALIZE INSTALLATION
• Remove protective film on the filters.
• Tip the filter into the lower slots at the rear of the
• Tip the filter into the lower slots at the rear of the
opening. Lift the filter and pull the knob forward
until the filter rests on the slots.
until the filter rests on the slots.
• To remove the filters, grasp the knob and push the
filter towards the rear and tilt downwards.
• Remove the protective film covering the control
panel on the front face of the hood, and any other
packaging materials.
packaging materials.
• Check all 4 lamps to assure tightness in sockets.
• Refer to the Owner’s Manual for operating
• Refer to the Owner’s Manual for operating
instructions.
• Clean the hood with an approved stainless steel
cleaner.
Filter Slots