Dacor DR30GFSLPH Manual

7

GlideRack™ Oven Racks 

Your oven comes with Dacor’s deluxe GlideRack 

oven racks. You can pull them out further than other 

types of oven racks and still support heavy pots and 

pans full of food. They are great for heavier foods 

and the optional Dacor baking stone.

1.  Align both sets of safety clips (right and left) on 

the back of the rack guides with the oven rack 

supports as shown below. NOTE: The diagram 

below shows installation with the rack guides 

extended but, the rack may be installed with 

or without the guides extended, whichever is 

easier.

2.  Begin to slide the rack in, lifting the front safety 

clips over the front of the oven rack supports.

3.  Push the rack all the way in.
4.  Grasp the rack in the center of the front and 

pull. The rack should come forward while the 

guides remain in place.

•  Grasp the rack with both hands and pull it gently 

straight out toward you until it stops.

•  Lift up until the front safety clips just clear the 

front of the rack supports on the oven. Continue 

to pull out. Moving the end of the rack back and 

forth slightly, left to right, as you pull, will make 

it easier to remove.

Setting Up Your Range

Installing the Oven Racks

You may use either rack type on any level inside the 

oven.

To reduce the chance of burns, position the oven racks 

when the oven is cool. If you must reposition a rack 

when the oven is hot, do not allow potholders to contact 

the heating element inside the oven.

Standard Racks

1.  Insert the end of the rack with the safety 

notches into the oven first.

2.  Attach both sides of the rack to the rack sup-

ports in the oven as shown in the diagram 

below.

3.  Begin to slide the rack in, and then, lift up so 

that the safety notches clear the ends of the 

rack supports.

4.  Push the rack all the way in with both hands. 

•  If you want to remove an oven rack, grasp it 

with both hands and pull gently straight out 

toward you until it stops.

•  To remove the rack completely, lift the front of 

the rack up about six inches and continue to 

pull it out. Lifting the rack releases the safety 

notches. The safety notches reduce the chances 

of a rack coming out of the oven accidentally.

Front of rack

Lift front safety clips 

over rack supports

Rack 

support

Slide oven rack 

supports between 

back safety clips

Back of 

guide

Rack guides

Front of rack

Safety notch

Rack 

support

Slide oven rack 

supports into slots 

on the rack

Back of rack