Dacor DR30GFSLPH 매뉴얼
7
GlideRack™ Oven Racks
Your oven comes with Dacor’s deluxe GlideRack
oven racks. You can pull them out further than other
types of oven racks and still support heavy pots and
pans full of food. They are great for heavier foods
and the optional Dacor baking stone.
To install a GlideRack oven rack:
1. Align both sets of safety clips (right and left) on
the back of the rack guides with the oven rack
supports as shown below. NOTE: The diagram
below shows installation with the rack guides
extended but, the rack may be installed with
or without the guides extended, whichever is
easier.
2. Begin to slide the rack in, lifting the front safety
clips over the front of the oven rack supports.
3. Push the rack all the way in.
4. Grasp the rack in the center of the front and
4. Grasp the rack in the center of the front and
pull. The rack should come forward while the
guides remain in place.
To remove a GlideRack oven rack:
• Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
• Lift up until the front safety clips just clear the
front of the rack supports on the oven. Continue
to pull out. Moving the end of the rack back and
forth slightly, left to right, as you pull, will make
it easier to remove.
Setting Up Your Range
Installing the Oven Racks
You may use either rack type on any level inside the
oven.
WARNING
To reduce the chance of burns, position the oven racks
when the oven is cool. If you must reposition a rack
when the oven is hot, do not allow potholders to contact
the heating element inside the oven.
Standard Racks
To insert a standard oven rack:
1. Insert the end of the rack with the safety
notches into the oven first.
2. Attach both sides of the rack to the rack sup-
ports in the oven as shown in the diagram
below.
3. Begin to slide the rack in, and then, lift up so
that the safety notches clear the ends of the
rack supports.
4. Push the rack all the way in with both hands.
To remove a standard oven rack:
• If you want to remove an oven rack, grasp it
with both hands and pull gently straight out
toward you until it stops.
• To remove the rack completely, lift the front of
the rack up about six inches and continue to
pull it out. Lifting the rack releases the safety
notches. The safety notches reduce the chances
of a rack coming out of the oven accidentally.
GlideRack Oven
Rack Installation
Standard
Rack
Front of rack
Lift front safety clips
over rack supports
Rack
support
Slide oven rack
supports between
back safety clips
Back of
guide
Rack guides
Front of rack
Safety notch
Rack
support
Slide oven rack
supports into slots
on the rack
Back of rack