British Telecom Granite 43685 Manual De Usuario
Los códigos de productos
43685
8
If you experience any problems, please call the Helpline on 0808 100 6556*
Battery low warning
The
icon flashes in the handset display when
you have only a few minutes talk time remaining.
Recharge the handset before you can use it
again. You also hear a low battery warning beep
if the battery is low and needs recharging. During
charging, the icon will scroll in the display.
Battery performance
In ideal conditions, a fully charged battery should
give up to 10 hours talk time or 100 hours
standby time on a single charge.
Note that new batteries do not reach full capacity
Note that new batteries do not reach full capacity
until they have been in normal use for several days.
To keep the battery in the best condition, leave
To keep the battery in the best condition, leave
the handset off the base for a few hours at a time.
Running the battery right down at least once a
Running the battery right down at least once a
week will help it last as long as possible.
The charge capacity of rechargeable batteries
The charge capacity of rechargeable batteries
will reduce with time as they wear out, giving
the handset less talk/standby time. Eventually
they will need to be replaced. New batteries are
available from the BT Granite Helpline on 0808
100 6556*. After charging your handset for the
first time, subsequent charging time is about 6–8
hours a day. Batteries and handset may become
warm during charging. This is normal.
Using your BT Granite on a Broadband line?
If this product is to be used on a broadband
line then you must ensure that it is connected
via an ADSL microfilter. Using this product on
a Broadband line without an ADSL microfilter
may cause problems with this product and your
Broadband service.
Additional BT ADSL microfilters can be purchased
Additional BT ADSL microfilters can be purchased
from www.shop.bt.com
Getting started
2. Insert battery as shown below. Make sure the coloured wires line up as shown on
the label inside the handset and the connector is plugged fully into the socket.
Note: If you ever need to remove the battery, simply slide open the battery
compartment cover and unplug the battery pack from the socket.
3. Attach the desk mounting plinth.
This is an optional attachment, the base can be placed flat on the desk without
the plinth if desired.
4. Place the handset on the base to charge for at least 24 hours. When the
handset is fully charged the
icon will be displayed.
5. When the battery is fully charged, plug one end of the telephone line cord
into the socket marked on the rear of the base and the other end into the
telephone wall socket.
telephone wall socket.
1
2