Linksys EA6900 4A Manual De Propietario

Setting Up: Advanced

Linksys EA-Series

Although running your router’s setup software is the easiest way to set up and 

maintain your router, advanced users may want to manually configure their 

router. Be careful when changing settings using this method.

To manually set up your router:
1.  Connect your router’s power adapter to a power outlet.
2.  To connect to your router by using a cable:

a.  Connect an Ethernet cable to the computer and to an available 

numbered Ethernet (blue) port on the back of your router.

b.  Disconnect the cable from the router’s Internet port.

3.  To connect to your router wirelessly:

a.  Make sure that your computer’s wireless networking is turned on.
b.  Connect to the secure wireless name shown in the Quick Start Guide 

that came with your router. (You can change the network name and 

password later during router setup.) If you need help connecting to 

the network, refer to your device documentation.

4.  Open a web browser on the computer, then go to 

www.linksyssmartwifi.com. (When there is no Internet connection, 

this address re-routes directly to your router.)

5.  Click  I have read and accepted the License Terms for using this 

software, read the license agreement, then select the checkbox.

6.  Select I want to skip Setup and and configure my router manually, 

then click Next.

7.  Enter admin as the user name, then enter the default password (admin). 

The main menu opens.

8.  After you finish changing settings, click Save and close the browser 

window.

For descriptions of the settings, click Help at the top of the screen.

Running Setup configures your router’s Internet connection. However, for 

some ISPs (Internet Service Providers), especially those outside of the United 

States, you may need to manually configure your router’s Internet connection.

To manually configure your router’s Internet connection:
1.  Connect to your router and log in using the instructions under “How to 

2.  Under Router Settings, click Connectivity. The Connectivity page opens 

to the Basic tab.

3.  Next to Type of Internet Connection, click Edit. 

Setting Up: Advanced