Linksys RE2000 Manual De Propietario

 

Linksys Wireless-N Range Extender

To associate your extender with your known access point or router:
1.  Make a note of the SSID and the security passphrase that your access 

point or wireless router is actually configured with. This information will 

be useful to carry on setup after the site survey is done.

2.  Select the network name (SSID) that you want to repeat with your 

extender by clicking the corresponding button in the Select column.

3.  Click Connect. You are prompted for the passphrase used to secure your 

wireless network. The type of security information required in this screen 

needs to match your access point or router’s wireless security settings.

4.  Enter the passphrase, then click Save Settings. Your extender wireless 

parameters should be configured. The wireless interface restarts, and the 

extender associates with the access point or router you have chosen.

Cross-Band Cross-band is a Linksys wireless feature that allows your range 

extender to use both Wi-Fi bands to deliver faster speeds in your network. The 

feature is automatically enabled when your range extender is connected to a 

dual-band router. If your range extender connects to a single band router, this 

feature will be disabled.

Your RE2000V2 works on a 2.4GHz and/or 5GHz network.

 

•

For first-time setup, you may need to place the extender closer to the 

router. After you’ve set up your extender, you can unplug it and move it 

to the final location.

 

•

To reduce signal obstructions, you can try alternate locations for the 

router and extender.

 

•

Avoid placing the router and extender near metal objects, masonry walls, 

and reflective surfaces such as glass or mirrors.

 

•

Avoid placing the router and extender near other electronics that may be 

causing signal interference. 

 

•

Wait until the Wi-Fi Protected Setup indicator stops blinking before 

trying to make the connection again.