Yamaha RXA3040 Manual De Propietario

PREPARATIONS

➤ Optimizing the speaker settings automatically (YPAO)

En

The following screen appears on the TV.

• To cancel the operation, disconnect the YPAO microphone before starting 

the measurement.

a Use the cursor keys to select “Multi Position” (p.48) or 

“Angle/Height” (p.49) (RX-A3040 only) and press ENTER.

b Use the cursor keys to select a setting and then press ENTER.

• If the cursor keys do not work, the remote control may be set to operate 

external devices. In this case, press RECEIVER and then use the cursor 
keys.

This completes the preparations. See the following page to start the 
measurement.

❑ Multi Position

Selects multi measure or single measure.

• If you perform the multi measure, the speaker settings will be optimized for you to 

enjoy surround sound in a wider space.

• If you perform the multi measure, first place the YPAO microphone at the listening 

position you will be seated most frequently.

Yes

Select this option if you will have several listening 
positions or if you want others to enjoy surround sound. 
You can take measurements at up to 8 different positions 
in the room. The speaker settings will be optimized to 
suit the area defined by those positions (multi measure).

No (default)

Select this option if your listening position will always be 
fixed. Take the measurements at only one position. The 
speaker settings will be optimized to suit that position 
(single measure).